9000 Aero (Auto)
Power =274 HP@ 5500
Torque=386 NM@2700
 
       
 
 
Saab 9000 Aero Dyno test
 
 

 

     
Product Detail
ECU ABBOTT RACING REPROGRMMED

By modifying information contained within the engine management module, the engine can deliver more power. This is specifically achieved by enhancing the ignition, fuel and boost values. To enable us to upgrade your car, we need your control module(s), or car at our workshops. This is the most cost-effective way to improve power whilst maintaining total reliability.
   
   
   



 
 
 
Product Detail
INTERCOOLER
ABBOTT ALUMINIUM
Our high flow, all aluminum intercooler flows 50% more air than standard, reducing turbo lag and allowing higher airflow above 4500 RPM. This allows the engine to produce seamless power from 2000 to 6000 RPM, especially on 2.3 models.Intake temperatures are significantly reduced, improving efficiency which again improves power and economy.Constructed to the latest race-specification with unique internal fibulators to increase cooling efficiency.
   
   
   



 
 
Product Detail
INTAKE PIPE
2 1/2 " ABBOTT (PIPE KITS) , ABBOTT THAILAND THROTTLE BODY
Replaces the Standard intake pipe to allow power outputs in excess of 250BHP. Improved response for all models from 175BHP upwards. Essential on all Aero models.
   
   
   


 
 
Product Detail
SUSPENSION KONI
We specify Koni adjustable dampers for most applications. Used in conjunction with our sports springs , the weight of the cars body is kept under greater control, improving the drivers level of confidence. Steering feel is more precise especially when changing direction quickly.The transformation in roadholding offered by this kit, cannot be overemphasised.Koni Adjustable dampers are externally adjustable and do not need to be removed from the car to be adjusted - just a brief stop at the side of the road will allow you to fine tune the damping with the turn of the supplied key.
   
   
   

 

 

 
 
Product Detail
ABBOTT SPRING
Our goal is always to improve roadholding and handling, but without reduction in ride quality and comfort. Our springs are designed in house using our own cars. Production made in Sheffield, England, our springs lower the car by 30mm (approx. 1") and are nominally 20% stiffer than standard. Powder-coated for corrosion protection, the springs have a 5 year warranty.
   
   
   

 

 

 
 
Product Detail
BRAKE
FRONT PBR 308 mm. BIG BRAKE KITS (VENT DISC) 2 POTS REAR BREMBO (SLOT)
   
   
   

 

 

 
 
Product Detail
MUFFLER
2 1/2 " ABBOTT FULL SET
   
   
   

 

 

 
 
Product Detail
MANIFOLD
SPECIAL ABBOTT THAILAND " BIG SIZE "
   
   
   

 

 

 
 
Product Detail
BLOW OFF VALVE
GREDDY " S " TYPE
   
   
   

 

 

 
 
Product Detail
REGURATOR
SARD SET 3.3 BAR
   
   
   

 

 

 
 
Product Detail
TRANSMISSION
AUTO ( SPECIAL PART ) MODIFIED
   
   
   

 

 

 
 
Product Detail
WHEEL
AZEV 17" BF. GOORICH 215/17 ZR